Notes for Daily Maintenance of Automatic Blood Coagulation Analyzer-江苏鸿恩医疗器械有限公司

• Keep the operational station clean;

• Cover the lid after use in order to prevent dust;

• Keep reagent and sample positions clean; do NOT leave liquid waste in reagent disk;

• Do NOT drop liquid and matters in the detector; otherwise, test accuracy will be effected;

• Clean sampling-probe after use to prevent clog;

• Stay away from direct sunlight and hazardous matters;

• Keep the device upright; do NOT shake or vibrate;

• Keep from erosion and moisture;

• Use stabilized voltage supply when power voltage is unstable;

• Do NOT touch the heater;

• Do NOT touch the moving parts when it is in motion;

• Exiting the system properly before turn off the power; avoid directly turning off the power;

• In case of error and faults, stop using the device and contact the manufacturer.

2. Components Maintenance

•  Reagent Disk: keep sample and reagent positions clean. Clean up immediately when any liquid accidentally overflows.

•  Sampling-probe: put lubricant on guide bar every week. Put 2 drops of lubricant on the joint of Y-axis guide bar and the arm; slide the arm up and down manually.

• Slider: Put lubricant on X-axis linear guide rail every week to keep it greased.

• Pallet: keep the surface clean. Used cuvettes need to be disposed properly. Put lubricant on Z-axis guide bar every week to reduce friction.

• Detector: Put lubricant on lead screw and guide bars every week.

• Pipeline: Check whether it is clogged or damaged every week. If find any damage, please replace it as soon as possible.

3. Scheduled Maintenance

      3.1 Every Day

•  Dispose the liquid waste.

•  Fill the detergent container.

• Fill the distilled water container.

• Check whether unused cuvettes are in the same positions as the setting displays.

• Check whether the reagent containers are in the same positions as the setting displays.

• Check whether the printer is running out of paper.

• Dispose used cuvettes, and remove samples and reagents after use.

• Use medical alcohol to clean keyboard, operational station, and any place contacted by the operator after use.

      3.2 Every Week

• Clean pipeline with detergent.

• Components maintenance.

• Wipe outer shell, computer, and monitor with soft rag.

       3.3 Every Half a Year

• Replace tubes.

• Data back-up. Back-up in advance if daily sample number is large.